News

The role of the cold-proof cotton helmet Cotton cold-proof helmets are produced and customized according to the national standard GB2811/2019 technical standard. When the worker's head is impacted by a falling object, the helmet shell and cap lining are used to decompose the impact force to the entire area of the cranium in an instant. The structural damage will absorb most of the impact force, so that the final impact force on the head of the personnel is reduced to below 4900N, thus protecting the head of the operator. The shell material of the helmet plays an important role in the overall resistance of the helmet. How to choose a cold safety helmet 1. The cold-proof cotton helmet is purchased according to the purpose The anti-cold cotton safety helmet products are divided into two categories according to the use: general operation type (Y type) cold-proof cotton safety helmet and special operation type (T type) cold-proof cotton safety helmet. Among them, the T type is divided into five categories: T1 type is suitable for Fire source workplace; T2 category is suitable for underground, tunnel, underground engineering, logging and other workplaces; T3 category is suitable for flammable and explosive workplaces; T4 (insulation) category is suitable for live workplaces; T4 (low temperature) category is suitable for in low temperature workplaces. Each type of cold-proof cotton helmet has certain technical performance indicators and scope of application, so the selection should be based on the industry and operating environment used. 2. Pay attention to raw materials for cold-proof cotton helmets There are many kinds of materials for making cold-proof cotton safety helmets, which can be selected according to needs. Nowadays, plastic ABS and FRP safety helmets are generally used more, and their colors are relatively beautiful. Rattan safety helmets and bamboo safety helmets cannot be guaranteed due to their quality, so try not to use them. 3. Choose the right style for the cold-proof cotton helmet According to the shape of the safety helmet, there are no brim safety helmets, small brim safety helmets, curling safety helmets, middle brim safety helmets, large brim safety helmets, etc. Among them, the big-brimmed helmets are suitable for open-air operations and have the effect of preventing sun and rain; the small-brimmed and non-brimmed helmets are suitable for indoor, tunnel, well, forest, scaffolding and other small activities, and are prone to collision with the brim narrow place. Fourth, pay attention to the product identification and appearance quality of the cold-proof cotton helmet When purchasing, you should check whether there is the manufacturer's name, safety certification label, production license number (domestic manufacturers must obtain a production license issued by the state), production date (the validity period of the plastic cap does not exceed Two and a half years, the validity period of the FRP cap does not exceed three and a half years), whether it is accompanied by a product certificate and instruction manual. In addition, dealers should try their best to show the test report of the batch of goods, as well as the production license of the manufacturer of the goods (only applicable to domestic manufacturers), and check the validity period. Structural requirements for cotton safety helmets 1 The top of the cap shell should be reinforced. It can be made into a smooth top or a ribbed structure. The cap shell is made without brim, with brim or rolled edge. 2 The plastic cap lining should be made into a structure with a rear hoop, and the size of the cap hoop can be adjusted freely. 3 The chin strap without the back hoop cap lining is made into a Y shape, and the one with a rear hoop is allowed to be made into a single piece. 4 Contact the cap hoop on the forehead of the head to breathe and absorb sweat. 5 Padding around the hoops, can be made in strips, or blocks, with space for air circulation. Matters needing attention 1. Read this manual before use. Users should choose our products correctly according to different working environments. Type y helmets are suitable for use in general workplaces from +50°C to -10°C, type t helmets are suitable for special operations. place to use. 2. The user first adjusts the cap hoop to a suitable position according to the size of his head and then wears it. 3. Tighten the chin strap when wearing it, and put the helmet firmly on the head to avoid the helmet falling off during work. 4. When the helmet needs to be cleaned, it must be washed with a soft brush and neutral detergent, avoid rubbing the inner lining, and it is strictly forbidden to use paint, gasoline and similar organic solvents and corrosives to clean. Pay attention to the use of cold-proof helmets 1. Before use, check whether the appearance of the cotton safety helmet has cracks, bumps, unevenness, wear, whether the cap lining is complete, and whether the structure of the cap lining is in a normal state. If there are obvious defects on the cotton safety helmet that affect its performance, it should be timely Scrap, so as not to affect the protective effect. 2. Users cannot disassemble or add accessories to the cotton safety helmet at will, so as not to affect its original protective performance. 3. The user cannot adjust the size of the cap lining at will, which will directly affect the protective performance of the cotton safety helmet. Once the impact of falling objects occurs, the cotton safety helmet will fall off due to poor wearing or directly hurt the wearer due to the impact. The wearer must wear the cotton safety helmet correctly and firmly when using it, and it cannot be shaken. It is necessary to fasten the chin strap and adjust the rear hoop to prevent the cold protection helmet from falling off. 4. Do not pierce the cotton safety helmet without permission, do not collide with the cotton safety helmet at will, and do not use the cotton safety helmet as a bench to avoid affecting its strength. 5. Cotton helmets that have been impacted or tested once should be discarded and cannot be used again. 6. Cotton safety helmets cannot be stored in an environment polluted by acids, alkalis or chemical reagents, and cannot be placed in high temperature, sunlight or humid places to avoid aging and deterioration.

Anti-static work clothes are believed to be not well understood by most people, even if many people wear it in work clothes every day. Anti-static work clothes are not very mysterious. The industries that require him include the energy industry, such as gas stations, gas stations, petroleum, chemical, pharmaceutical, microorganism, optical instruments and other industries. These industries have certain WeChat or uniqueness. The purpose of electrostatic work clothes is to prevent potential live, explosion and dustproof needs of some special industries for a clean environment. The anti-static work clothes fabric is not the kind of anti-static work clothes that ordinary people often think has an immune function to the static electricity of work clothes, but his clothes are made of synthetic fiber fabrics containing conductive silk, that is, when weaving, weaving a superfine The conductive silk is added to the fabric, and the work clothes customized by the anti-static manufacturer use a unique anti-static fabric technology, which can effectively divert a small amount of static electricity generated by the wearer of the work clothes into the ground to prevent static accumulation. Anti-static overalls do not necessarily generate static electricity, but conduct static electricity in a timely manner through certain conditions. A. As special clothing, anti-static work clothes should all use anti-static fabrics, and generally do not use lining. When a lining must be used, the exposed area of the lining should not exceed 20% of the total inner surface area of the garment. B. Different grades of anti-static fabrics and anti-static work clothes should be selected according to the static sensitivity of different processing objects in different places. C. It is forbidden to attach or wear any metal objects on the anti-static work clothes. D. It is not allowed to put on or take off work clothes at the site where electrostatic sensitive products are operated (the clothes should be changed in the designated locker room). The buttons of the work clothes should be all buttoned up, and try not to make them in a state close to undressing. E. The washing of work clothes should be carried out by simple methods as far as possible, and the washing of work clothes by strong mechanical and chemical operations should be avoided. It is better to use neutral washing, do not mix with other clothes when washing. Use hand wash or washing machine rub procedure to avoid breakage of conductive fibers. F. Anti-static work uniforms should be kept clean and anti-static performance. After use, use a soft brush with a soft cloth dipped in neutral detergent to scrub, so as not to damage the fabric fibers. G. Be sure to choose anti-static work uniforms produced by regular clothing manufacturers, and test the quality of the work clothes before use to ensure that everything is safe. H. After wearing for a period of time, the anti-static work clothes should be inspected. If the anti-static performance does not meet the standard requirements, it cannot be used in anti-static work uniforms.

Recently, the editor found that a new fashion trend has appeared on the Internet: that is, everyone likes to use one or more keywords to summarize or summarize a certain period of their life or experience. This keyword can express the characteristics of an item or an experience to the greatest extent. It is very concise and clear, giving people the most intuitive understanding experience. So as an indispensable protective equipment in daily work, what keywords should labor insurance shoes be used to express? Let the editor briefly introduce his thoughts on the keywords of labor insurance shoes for everyone. The first key word is "safety" The biggest difference between labor insurance shoes and shoes worn in daily life is that labor insurance shoes have a strong protective function and are suitable for professional workplaces. Most factories and enterprises require workers to wear standard labor insurance shoes when working, and not to wear their own shoes into the production workshop, which effectively guarantees the safety of workers. The second key word is "appropriate" Why use suitable to describe a pair of labor insurance shoes? Because there are many types of labor insurance shoes, different labor insurance shoes are suitable for different types of work. Therefore, workers should be protected accordingly according to the possible hazards in the working environment and operating procedures, which is similar to what we call "prescribe the right medicine" in our daily life. Therefore, the editor uses suitable to describe labor insurance shoes to tell everyone that you must choose shoes that meet your needs. The third key word is "comfort" No matter how powerful a pair of labor insurance shoes is and how expensive and advanced materials are made, if it is not a pair of shoes that make people feel comfortable to wear, it is not a pair of qualified labor insurance shoes. The editor hopes that workers must try on the shoes when purchasing labor insurance shoes, and replace them in time if they are uncomfortable. Choosing a pair of comfortable labor insurance shoes can reduce the workload of workers and improve work efficiency. ,

We know that there are three ways to deal with noise pollution. One is to take noise reduction measures at the sound source, the second is to take noise reduction measures on the transmission route, and the third is to take noise reduction measures at the human ear. For the third method, the specific measures mainly include the use of protective earmuffs, earplugs and headphones. The over-ear noise protection earmuffs are made into earmuffs by compounding the sound-absorbing and sealing flexible cushion of the sound-insulating shell to isolate the external noise by surrounding the ears. Since this method is external sound insulation, there is relatively enough space for the design of sound insulation earmuffs to achieve better sound insulation and sealing, and the sound insulation effect is guaranteed. The disadvantage is that it is bulky, not portable, and not suitable for hot weather use. In-ear sound insulation earplugs are made of sound-absorbing elastic materials to fill the ear canal, so as to achieve the effect of sound insulation. According to the different materials of earplugs, it can be roughly divided into two categories: silicone and polyurethane. Choose the right size earmuffs and earplugs, and when worn correctly, you can achieve a noise reduction effect that significantly blocks external noise. The disadvantage of in-ear earplugs is that due to the penetration into the ear canal, long-term use will cause friction and pain, and the stethoscope effect will occur from time to time. Whether it is an over-ear earmuff or an in-ear earplug, passive noise reduction technology is used, which reduces noise by blocking and sealing. For medium and high frequency noise, the effect is better, but for medium and low frequency noise, due to its strong penetrability, the effect is relatively poor. The medium and low frequency noise is the most irritating to the human body, which is why the medium and low frequency noise is unacceptable even if the sound is small. Corresponding to passive noise reduction technology is active noise reduction technology, and active noise reduction headphones are an important application of this technology. Active noise-cancelling headphones use the built-in electronic noise-cancelling system to achieve better noise-cancelling effects. The electronic noise reduction system is mainly composed of a pickup (mobile phone ambient noise), a processing chip (analyzing noise), a speaker (producing echo sound waves), and a power supply system (providing power). After collecting the ambient noise, it is analyzed by the processing chip, and then the reverse sound wave equal to the external noise is generated to neutralize the noise, so as to achieve the effect of noise reduction. In acoustics, the principle behind this technique is called "destructive interference". Wearing active noise-cancelling headphones, you will feel that the ambient background sound you hear becomes high-frequency, because the noise-cancelling headphones mainly filter out the middle and low frequency components in the noise. So why is destructive interference mainly aimed at the middle and low frequencies? The reason is that the mid-low frequency waveforms are long and stable, with slow natural decay, while the high-frequency waveforms are relatively short and change rapidly, with fast natural decay. This means that mid- and low-frequency noise can be well picked up by the microphones in the active noise-cancelling headphones and analyzed and calculated in the processing chip. And high-frequency noise may have changed before the active noise-cancelling headphones emit reverse sound waves. The active noise-cancelling headphone market is a mixed bag, with uneven products and large and high price changes, so it is easy to enter the pit. Depending on the quality of the product, there will be different degrees of defects, such as noise floor, wind noise, ear pressure, current pop, etc. In addition, due to the inevitable signal delay and complex changes in the external environment, the noise reduction effect of active noise reduction headphones Nor is it perfect. In general, all kinds of ear noise protection products and their respective characteristics, in order to exert the best noise reduction effect, still depends on the scene of use. In addition, the price/performance ratio can not be ignored, in short, the most suitable one is the best.

Hongxing Amber patented gloves, "grip firmly" wear-resistant coated work gloves, with nylon + gray foamed nitrile coating anti-static lining, are our company's six main categories of hand protection products labor protection gloves One of them is the high-end new protective equipment produced by our company to escort your safety. The product uses a seamless woven lining to keep you safe while maximizing the breathability of the glove, making your work more comfortable. The outer surface of the gloves is coated with nitrile frosting, which ensures the grip performance of the gloves and maximizes flexibility. It is also wear-resistant and oil-resistant, slip-resistant and tear-resistant to protect your safety. This product adopts the latest Chinese national standard GB 24541. -2009 and Q\SH CG99003-2019, have been inspected and fully meet the standards, and are good products you can trust.

1. Different characteristics 1. Nitrile gloves: Nitrile examination gloves can be worn on both hands, made of 100% nitrile latex, without protein, effectively avoiding protein allergy; the main performance is puncture resistance, oil resistance and solvent resistance; hemp-like surface treatment, avoid It can prevent the device from slipping off during use; high tensile strength avoids tearing when wearing; after powder-free treatment, it is easy to wear and effectively avoid skin allergies caused by powder. 2. PVC gloves: resistant to weak acid and alkali; low ion content; good flexibility and touch; suitable for production processes such as semiconductors, liquid crystals and hard disks. 3. Latex gloves: latex gloves have wear resistance, puncture resistance; acid and alkali resistance, grease, fuel and various solvents, etc.; have a wide range of chemical resistance, good oil resistance; latex gloves feature a unique fingertip texture design , greatly enhance the grip, effectively prevent slipping. different uses 1. Dingqing gloves: mainly used in medical, pharmaceutical, hygiene, beauty salons and food processing industries. 2. PVC gloves: suitable for clean room, hard disk manufacturing, precision optics, optical electronics, LCD/DVD liquid crystal manufacturing, biomedicine, precision instruments, PCB printing and other industries. It is widely used in labor protection and home hygiene in health inspection, food industry, chemical industry, electronics industry, pharmaceutical industry, paint and coating industry, printing and dyeing industry, agriculture, forestry, animal husbandry and other industries. 3. Latex gloves: can be used in household, industrial, medical, beauty and other industries. Suitable for automobile manufacturing, battery manufacturing; glass fiber reinforced plastic industry, aircraft assembly; aerospace field; environmental cleaning and cleaning. Third, the material is different 1. Nitrile gloves: made of nitrile rubber. 2. Latex gloves: made of latex. main raw material. 3. Latex gloves: made of latex.

· General natural fabrics do not have static electricity, and pure cotton clothes are one of them. Dongying Hongxing Labor Protection Products Co., Ltd. produces Body Protective Clothing and other labor protection products with reliable quality. One of the main reasons is that the better the insulation of the material, the easier it is to generate static electricity. Conversely, the worse the insulation, the easier it is to isolate static electricity. That is to say, pure cotton clothes are actually not insulating. · Static electricity is generally caused by friction. If the static electricity generated by friction is an insulating material, it cannot be dissipated and will accumulate on the surface of the fabric, resulting in the more obvious static electricity we see. · The Body Protective Clothing made of pure cotton will actually have static electricity, because there is also friction, but once it is generated on pure cotton clothes, it will be quickly conducted away. won't stop. Therefore, it seems that cotton clothes are more conductive to static electricity than Ordinary Clothing.

There are many types of safety helmets. Different types and different manufacturers have different quality of safety helmets. Therefore, workers must distinguish clearly. In general, you can choose through the following steps: The latest standard for helmets is: GB2811-2019 1. Choose manufacturers with helmet production qualifications, do not choose those brands that have no small factories! 2. Select the safety helmets that have passed the inspection, and the safety helmets must choose those that have passed the quality inspection! In general, it is: a factory with production qualifications, qualified hats, and a certificate of conformity. You can choose hats according to these three points, don't blindly compare prices.

There are many materials for the production of helmets. At present, the commonly used materials for the production of helmet shells at home and abroad are: ABS material, HDPE material, PC material, FRP material, etc.; the inner structure of the headgear is mainly produced by LDPE, PA and other materials; The top liner is made of HDPE or sponge composite nylon material, the sweat band is made of PVC film, acrylic or terry cloth sponge composite and other materials, and the acrylic and polyester tapes are the corresponding cap hoop connectors. Several main safety helmet products currently produced in various countries in the world are briefly described as follows: (according to international practice, the helmet shell material is classified) 1.ABS safety helmet The full name of ABS plastic is acrylonitrile-butadiene-styrene resin, which is the abbreviation of Acrylonitrile Butadiene Styrene in English. This engineering plastic has heat resistance, high surface hardness, dimensional stability and good chemical resistance. At the same time, the electrical insulation performance is good, it is rarely affected by temperature and humidity, and it remains constant in a wide range of frequency changes. In addition, its chemical properties are also very good, and it has little effect on water, inorganic salts, alkalis and acids. ABS material has good impact strength and does not drop rapidly at low temperatures. Of course, the materials suitable for the production of safety helmets generally mainly use ultra-high impact ABS materials, otherwise the impact test will be unqualified. (This material is widely used in other countries except for a small number of countries such as North America that do not use this material to produce helmets.) 2.HDPE safety helmet HDPE plastic is a high density polyethylene material (High Density Polyethylene), which has high surface hardness and good heat resistance, electrical insulation and dimensional stability, and is widely used in the production of safety helmets. However, the compressive strength of this material is poor. If the internal structure of the cap shell and the wall thickness design of the product are not improved, the lateral pressure test is often unqualified. Therefore, the helmet brim of this material must be designed to strengthen the lateral pressure resistance. Otherwise, in Europe and Australia , Japanese and Chinese standards are difficult to pass. Because the North American standard does not have this item of side pressure. (HDPE helmets are widely used in the Americas, while in Japan, South Korea and other countries basically do not use HDPE to produce helmets.) 3. PC hard hat PC plastic is a polycarbonate material (Polycarbonate), which is hard and tough, with high impact resistance, high dimensional stability, good electrical insulation properties and high temperature resistance. Due to the high price of the material, it is rarely used in other countries except Japan. Of course, because some special materials in PC have good temperature resistance, many metal smelting industries require such high temperature-resistant PC helmets. 4. FRP helmet FRP material is glass fiber reinforced plastic, referred to as Fiberglass Reinforced Plastics. This material has high fiber strength, excellent heat resistance and electrical insulation properties, as well as excellent acid and water resistance, flame retardant, small deformation and other characteristics. 5. Other helmets In addition to the above 4 kinds of materials for the production of helmets, there are also the following types of helmets, which are mainly produced in China and are hardly seen in foreign helmet manufacturers and exhibitions. (1) Tape safety helmet: use rubber and canvas to heat-press into a tape safety helmet. (2) Cold-proof safety helmet: The plastic inner shell is used as the interlayer, and the cold-proof safety helmet made of sheep shearing and plush is used for the outer shell, which is suitable for winter protection. (3) Bamboo woven safety helmet: a safety helmet made of bamboo poles. (4) Rattan wicker helmet: This type of helmet is a helmet woven with rattan or wicker material, but the flame retardant effect is extremely poor. (5) Aluminum safety helmet: Very few manufacturers use aluminum die-casting to produce aluminum safety helmets.

The material of the safety helmet is glass fiber reinforced plastic, modified polypropylene plastic, ABS plastic, polycarbonate plastic and so on. 1. FRP helmet: mainly used in metallurgical high-temperature workplaces, oilfield drilling and forest logging, power supply lines, high-rise building construction and construction scenes in cold areas. 2. Polycarbonate plastic safety helmet: mainly used in oil field drilling, forest harvesting, power supply lines, construction and other operations. 3. ABS plastic safety helmet: mainly used in indoor and normal temperature workplaces with high impact strength such as mining and machinery industry. 4. Ultra-high molecular polyethylene plastic safety helmet: it is suitable for a wide range of applications, such as metallurgical chemical industry, mining, construction, machinery, electric power, transportation, forestry and geology and other types of work. 5. Modified polypropylene plastic safety helmet: mainly used in metallurgy, construction, forest, electric power, mining, well, transportation and other types of work.

I have been engaged in the labor insurance glove industry for more than ten years. Share your industry insights and personal recommendations. For large industries, the labor insurance industry should belong to the sunshine industry. With the improvement of people's living standards and the strengthening of self-protection awareness, the prospects of the labor insurance industry are still very impressive. Because labor insurance gloves are high consumables, which is the so-called "reciprocal sales" advantage. Now everyone knows that there are several major labor insurance production bases in the country, Shandong has the most, Weifang Gaomi, Linyi Pingyi, Tengzhou, and Jiangsu Nantong. Zhuji. Let's talk about the advantages first. The first is the industry advantage. The second is the sales advantage. The third is the concentration of advantages. The fourth is the prospect advantage. These four advantages are actually much better than other businesses if you think about them carefully. The industry is a sunrise industry and can be done for a lifetime. High consumables have a good sales advantage, unlike large items, which are bought once or twice in a lifetime. Each labor insurance glove production base has concentrated advantages, which are mainly reflected in the aspect of labor, parts maintenance, and raw material supply. In this case, are there many relatives and friends who can directly or indirectly help you get started quickly? The answer is yes. Not to mention prospects. As long as there are working people in labor production, there is a market demand for labor insurance gloves. Now the Internet is very popular, but don`t worry, it is impossible to do all of the Internet, there will definitely be physical enterprises, not to mention that the state has also issued policies to vigorously support and encourage physical enterprises.

Anti-static work clothes are not mysterious, interpret anti-static work clothes for you Most people know very little about anti-static work clothes, although many wear them every day. Anti-static work clothes are no mystery. The industries that need them are the energy industries, such as gas stations, gas stations, petroleum, chemical, pharmaceutical, microbiology, optical instruments, etc. Employees wear anti-static work clothes to prevent potential electrification, explosion, and environmental dust-proof requirements in some special industrial environments. Anti-static overalls fabric design Clothing enterprise fabric is a kind of conductive thread that mainly contains a large amount of synthetic fibers, that is, synthetic fiber fabrics with ultra-fine conductive threads are used when weaving, and the custom-made overalls provided by anti-static manufacturers adopt this With a unique anti-static fabric information technology, the utility model country can effectively transport a small amount of electrostatic current generated in the work clothes by the work management personnel to the ground to prevent the accumulation of static electricity. Anti-static clothing does not necessarily have no effect on static electricity, but needs to pass our certain conditions to transmit static electricity in time. Since anti-static work clothes are special protective clothing, there are some precautions in wearing, using and maintaining them. Correct use of anti-static work clothes can ensure personal safety and work results. Anti-static work clothes are a special kind of clothing, which should be completely made of anti-static fabrics when used, and generally do not use lining. When the lining must be available, the exposed area of the lining shall not exceed 20% of the total inner surface area of the garment. Different anti-static fabrics and anti-static clothing should be selected according to the electrostatic susceptibility of different processing objects at different positions. It is strictly forbidden to attach or wear metal objects on the anti-static work clothes. On-site personnel operating static-sensitive information products shall not put on or take off work clothes. We must fasten all the buttons on the work clothes so as not to approach the state of undressing. Cleaning of work clothes should be as simple as possible, avoiding mechanical and chemical manipulations. It is best to use a neutral wash and do not mix with other clothes when washing. Use a hand washing or washing machine rub program to avoid damaging the conductive fibers.

How does arc protection clothing prevent arc injuries? The main reason arc protective clothing provides arc damage protection is that arc protective clothing is made of high-tech materials. The material has the characteristics of heat resistance, flame retardant, non-burning, non-melting, H-class electrical insulation, etc. It can expand rapidly when the arc explodes, thereby increasing the density and thickness of the arc-extinguishing service structure. Thereby forming a protective layer to reduce human skin contact damage and thermal energy of the arc. Dressing requirements Arc protection can only adequately protect body parts other than the head, neck, hands, and feet, so in environments prone to arc hazards, other arc protection components, such as arc shields, are necessary. Insulated shoes and other equipment. In arcing environments, be sure to wear arc-proof clothing and always have parts paired and not exposed. Arc-proof suits must not be researched and used alone in special education environments, but must be researched and used together with supporting personal information protection equipment companies, especially in the face of some chemical hazards, toxic gases, viruses and other biochemical, radioactive, unknown gases and liquids and other special social circumstances. wash When the product is wet, we need to improve the drying as soon as possible. If there are stains, wash and dry as soon as possible to avoid mold. You can wash your hands, or you can use a machine to wash your hands. Please use neutral detergent and be sure to wash it yourself. The best water temperature is 40-48 degrees Celsius, without bleach and softener. When drying, avoid due to prolonged periods of no exposure to fluorescent lights or to prevent the performance of clothing products through UV rays. To protect a curved garment with water stains, blood stains, etc., please use dry detergent and rinse with water system before washing. After removing the blood stains, it is strictly disinfected with a disinfectant. patch up If the user is worn, torn, burned or corroded during use, please carry out professional maintenance as soon as possible, use the company's original materials to better maintain the original performance, and avoid using ordinary parts. storage The storage of arc-proof clothing must be kept clean, dry and ventilated, and must not be mixed with corrosive substances to prevent corrosion. In order to avoid moisture, the protective clothing should be 20 cm away from the wall and the ground, and it should be dried regularly to avoid mildew, moths, etc.

What is the standard of labor protection equipment? When purchasing labor insurance shoes, you must pay attention to choosing labor insurance shoes that meet the standards, so as to effectively ensure the quality and functional utility of labor insurance shoes. So, what is the standard of anti-smashing labor insurance shoes? How do we choose labor insurance shoes that meet the standards? 1. What are anti-smashing safety shoes Anti-smashing labor insurance shoes refer to safety shoes with protective toe caps on the toe part that can bear the weight and protect the toes from external heavy objects. Therefore, there are relevant standards for anti-smashing labor insurance shoes. Whether an anti-smashing labor insurance shoe is safe and whether it can be used at work must first meet the safety requirements. Dongying Hongxing Labor Insurance Co., Ltd. is a private enterprise integrating R&D, production and sales of labor insurance products. The company has a professional R&D team, standardized production lines and quality testing facilities. The company produces and operates more than 1,000 products, which can meet the full range of labor protection needs. 2. China's national standard for anti-smashing labor insurance shoes Before buying labor insurance shoes, we must first clarify the national standards for anti-smashing labor insurance shoes. China has launched a new national safety standard for labor insurance shoes GB21148-2020, so anti-smashing labor insurance shoes must also meet the requirements of this standard. In addition, the national standard also requires the impact resistance and pressure resistance of anti-smashing labor insurance shoes. It is required that the protective toe cap of labor insurance shoes must be made of non-metallic materials. Dongying Hongxing Labor Insurance Co., Ltd. strictly implements national standards to produce labor protection products. The company has a professional R&D and production team and standardized assembly lines. The company's products serve many fields and are sold to both domestic and international markets. 3. How to choose anti-smashing labor insurance shoes When the purchaser chooses anti-smashing labor insurance shoes, it must observe the materials and safety factors of the labor insurance shoes, and must choose the labor insurance shoes that meet the national safety standards. The safety test of the purchased labor insurance shoes can be carried out in time, and if they do not meet the requirements, they can be returned as soon as possible. Dongying Hongxing Labor Insurance Co., Ltd. has established a long-term cooperative purchase and sales relationship with well-known international and domestic raw material brand enterprises. According to customer needs, it selects famous brand raw materials and controls product quality from the source. On the basis of supplying Sinopec labor protection products, the products are sold all over the country and exported to the United States, Russia, Saudi Arabia, Iran and other international markets. The brand HongxingAnbeier of Dongying Hongxing Labor Insurance Co., Ltd. has established a product quality control system, and has passed the IS09001 quality management system certification, IS014001 environmental management system certification, and 0HSAS18001 occupational health and safety management system certification. A special quality control class was established, and Dongying Hongxing Labor Insurance Co., Ltd. used the China Labor Protection Equipment Alliance (CUPPE) labor protection equipment tracking and traceability system to conduct full-process testing from raw material procurement to product entry (exit) warehouses, and strictly control the entry of substandard products into the market. Grasp the quality from the source, a good company that is trustworthy

With the rapid development of the manufacturing industry, more and more labor protection articles are used. Labor protection articles are articles used to ensure the safety and health of employees. Different industries have different needs for labor protection products. What do labor protection supplies include? Next, I will give you a detailed introduction. What do labor protection supplies include: Head protection technologies include: helmets, work caps, anti-static work caps, winter cold caps, etc. Eye protection and face protection include: safety goggles, safety goggles, welding goggles, etc. Respiratory protection includes: respiratory dust mask, gas mask, positive pressure air supply system, etc. Hearing protection includes: earplugs, earmuffs. Hand protection includes: chemical-resistant gloves, cut-resistant gloves, welding gloves, insulating gloves, etc. Protective clothing mainly includes: chemical safety protective clothing, heat insulation clothing, electric welding work clothes, flame retardant work clothes, etc. Foot protection includes: safety shoes (boots), electrically insulating shoes (boots), chemical-resistant shoes (boots), etc. Fall protection includes: harness, safety rope, connector and rescue system. Fire emergency includes: respirator, fire helmet, fire suit, etc. Labor insurance supplies mainly include helmets, gloves, work clothes, welding, protective covers, glasses, protective shoes, etc. To purchase labor insurance supplies, you need to check the product production license, product certificate, and safety certificate. Dongying Hongxing Labor Insurance Co., Ltd. is a private enterprise integrating R&D, production and sales of labor insurance products. The company has a professional R&D team, standardized production lines and quality testing facilities. The company produces and operates more than 1,000 products, which can meet the all-round needs of labor protection "from head to toe". The company's products serve many fields, and the products are sold to both domestic and international markets. The company has successively become a director unit of the Occupational Health Protection Products Committee of China Textile Business Association, a member unit of China Labor Protection Products Alliance, a member unit of Shandong Labor Protection Products Industry Association, and a top 50 enterprise in the national labor protection industry; Abeier brand has become Shandong Labor Protection Products Industry Association Recommended Brand. The products are of excellent quality and are sold at home and abroad. International friends are welcome to come and buy.

People-oriented and sincere service Dongying Hongxing Labor Insurance Co., Ltd. is a private enterprise integrating R&D, production and sales of labor insurance products. The company has a professional R&D team, standardized production lines and quality testing facilities. The company produces and operates more than 1,000 products, which can meet the all-round needs of labor protection "from head to toe". The company's products serve many fields, and the products are sold to both domestic and international markets. The company has always adhered to the company tenet of "people-oriented, sincere service", everything revolves around workers, everything is for workers, everything starts from the labor protection needs of workers, and provides the highest quality and all-round labor protection products for workers' health and well-being. . Company Overview Dongying Red Star Labor Insurance Co., Ltd. was founded in December 1995 with a registered capital of 300 million yuan and total assets of 230 million yuan. It has more than 500 employees, including 22 professional and technical personnel, with sales of 280 million yuan in 2019. It is a collection of labor insurance products. A professional company integrating R&D, production and sales. The company has a professional R&D team, standardized production lines and quality testing facilities. The company produces and operates more than 1,000 products in 30 categories, which can meet the all-round needs of labor protection "from head to toe". Dongying Hongxing Labor Insurance Co., Ltd. is located in Dongying City, the central city of China's Yellow River Delta, where the Yellow River enters the sea and Shengli Oilfield rises here. The two national strategies of "Yellow and Blue", the cooperative development of the Bohai Rim region and the coordinated development strategy of Beijing, Tianjin and Hebei have been integrated and implemented in Dongying. The ecological protection and high-quality development of the Yellow River Basin have become a national strategy. Superior environmental advantages. Since its establishment, the company has always adhered to the company tenet of "people-oriented, sincere service", vigorously promoted the "red star" spirit, and earnestly fulfilled the mission of "growing together with employees, progressing with the times, seeking well-being for the society, and contributing to the country", Actively act and seek progress while maintaining stability. Dongying Hongxing Labor Insurance Co., Ltd. products serve many fields, and the products are sold to both domestic and international markets. The company has successively become a director unit of the Occupational Health Protection Products Committee of China Textile Business Association, a member unit of China Labor Protection Products Alliance, a national top 50 enterprise in labor protection industry, a member unit of Shandong Labor Protection Products Industry Association, and a strategic cooperative supplier of Sinopec labor protection products. The company's Red Star · Amber brand has become the recommended brand of Shandong Labor Protection Products Industry Association. company advantage High-end product development Relying on the China Academy of Safety Production Science, a professional R&D institution has been established, with 6 R&D personnel with senior professional titles, and an annual investment of more than 3 million yuan in R&D. Obtained 5 national invention patents such as "safety cooling sanitation worker overalls and safety helmet based on damping universal joint", and obtained 30 utility model patents such as "new non-slip wear-resistant gloves, easy to replace filter core oilfield petrochemical gas filter masks". Intelligent Design Discretion The introduction of high-precision and intelligent bed-cutting and cloth-spreading machines, and the use of advanced equipment such as computer template machines and laser opening machines, have realized the automation of design, typesetting, cloth spreading, and feeding, with more accurate design and more professional discretion. Advanced facilities and equipment Build a high-standard production workshop of 8,600 square meters, equipped with more than 200 sets of advanced equipment such as disc injection molding machines, automatic production lines for anti-static work clothes, automatic production lines for industrial gloves, automatic production lines for safety helmets, and automatic production lines for masks, which greatly improves the labor productivity. High-quality big-name raw materials Dongying Hongxing Labor Insurance Co., Ltd. has established a long-term cooperative purchase and sales relationship with well-known international and domestic raw material brand enterprises. According to customer needs, it selects famous brand raw materials and controls product quality from the source. Fine craftsmanship It has formulated strict production process specifications, strictly implemented the process flow, and paid attention to detail management. Strict quality control Established a product quality control system, passed IS09001 quality management system certification, IS014001 environmental management system certification, 0HSAS18001 occupational health and safety management system certification. A special quality control class was established, and Dongying Hongxing Labor Insurance Co., Ltd. used the China Labor Protection Equipment Alliance (CUPPE) labor protection equipment tracking and traceability system to conduct full-process testing from raw material procurement to product entry (exit) warehouses, and strictly control the entry of substandard products into the market. Wide-area sales market On the basis of supplying Sinopec labor protection products, the products are sold all over the country and exported to the United States, Russia, Saudi Arabia, Iran and other international markets. Warm after-sales service Passed the national GB/T27922-2011 "Commodity After-sales Service Evaluation System" five-star enterprise certification, established product sales tracking service, substandard product recall system, 24-hour customer service hotline, and responded promptly. Aiming at customer satisfaction, we deal with customer demands objectively and rationally. scientific management practices Established four management mechanisms of "system constraints, performance appraisal, employee career planning, and scientific operation", vigorously improved the company's management service level and market core competitiveness, and achieved scientific decision-making, standardized management, and smooth operation. Efficient professional team Always pay attention to team building, implement humanized management, give full play to the subjective initiative of employees, and rely on collective strength to build a cooperative, pragmatic, efficient, professional and capable entrepreneurial team. The red star shines on me to fight, I add brilliance to the red star Singing the company's slogan, carrying forward the "Long March" spirit, inheriting the red gene, singing the song of "struggle", and being grateful to the society are the main theme of the company's development. company's product Brand Interpretation HongxingAnbeier Carry forward the spirit of the Long March, inherit the red gene, serve the protection of health, and move forward with the king Features Comfortable Decent Aesthetic Fashion Durable Safe Product Series ●Head protection series ●Eye and face protection series ●Body protection series ●Respiratory protection series ●Hand protection series ●Fall protection series ●Foot protection series ●Hearing protection series ●Daily washing series ●Industrial safety series Innovation Quality Environmental Protection Integrity Safety Sharing Establish new ideas, guide new practices, build new brands, and achieve new development. Innovation is the first driving force of the company's development; high-quality products are the essential standards of the company's brand; environmental protection is the inherent quality of the company's products; integrity is the foundation of the company's employees; safety is the eternal theme of company management; sharing is the highest realm of company survival. Grow together with employees, progress with the times, To seek well-being for the public and to contribute to the country. Bear in mind the company mission and fulfill responsibilities. Correctly handle the relationship between the company, employees, times, customers, and countries to achieve coordinated, sustainable and healthy development of the company. Aim high and live up to the youth New era, new opportunities, new actions, new journeys. Red Star Company will firmly seize the great opportunity of "building a socialist modern country in an all-round way" and building a "healthy China", actively act, forge ahead, and take advantage of the trend. Don't forget the company's purpose, keep in mind the company's mission, vigorously promote the "artisan spirit of excellence and the innovation spirit of pursuing excellence", re-conversion of kinetic energy, expansion of production capacity, industrial Internet, systematization of services, Dongying Hongxing Labor Insurance Co., Ltd. strives to create modern labor protection products First-class enterprise.

Anti-noise earmuff is a product that can obviously reduce noise and effectively protect the hearing of the ear. Anti-noise earmuffs are widely used in factories, airports and other places with strong noise. Ear muffs are classified into two types according to their appearance: independent anti-noise earmuffs and anti-noise earmuffs with safety helmets. Wear method: Pull the noise-proof earmuffs outwards and across the top of your head. Place the cups over your ears so that the soft pads of the earmuffs cover your ears and fit your head tightly. While adjusting the headband, adjust the position of the anti-noise earmuff cup up and down, so that the headband and the top of the head form a stable and comfortable match. The headband should be worn directly above the head. Friendly reminder: In order to obtain good protective effect, prevent noise soft mat of ear flaps should be tightly joint head, any impact wear tightness of objects, such as: (try to dial back hair), ear hair thick frames or not close to the head, on the ears of a pencil, and hats, etc., will make noise ear shields don't wear tight and thus protection performance. Do not bend or change the shape of the headband, as this will loosen the headband and cause sound leakage. Wearing method of anti-noise earmuff for safety helmet: Insert the plug on the earmuff into the standard accessory slot on the helmet and fix it in the correct position. When using the earmuff, push the metal bands inward until both sides make a "click" sound, which indicates that the earmuff has been switched from the "ready" position to the "use" position. When the earmuffs are in the "in use" position, neither the cup nor the metal band should come into contact with the edge or inner lining of the helmet as this may cause leakage. Friendly reminder: In order to obtain good protective effect, prevent noise soft mat of ear flaps should be tightly joint head, any impact wear tightness of objects, such as: (try to dial back hair), ear hair thick frames or not close to the head, on the ears of a pencil, and hats, etc., can make earmuffs don't wear tight and thus protection performance. Do not bend or change the shape of the metal band, as this will loosen the metal band and cause sound leakage. Anti-noise earmuffs are replaceable with snap-on cushions and sound-absorbing foam. In order to ensure good noise reduction effect, hygiene and comfort, it is recommended to replace twice a year. The noise volume is relatively small, such as electronic processing workshop, can use anti-noise earplugs, and for the operation of large noise decibel recommended to choose anti-noise earmuffs.

ABS safety helmet and FRP safety helmet are two kinds of safety helmet of different materials commonly used in construction sites, buildings, workshops and factories. Many people do not know what the difference is between these two kinds of safety helmet, which one is better? ABS safety helmet is made of ABS engineering plastics. ABS safety helmet has high impact resistance and puncture resistance. Suitable for electric power, chemical, petroleum, construction, forestry, port, metallurgy and other industries. FRP safety helmet is based on unsaturated special polyester resin and alkali free high-strength glass fiber cloth as raw materials, using modern technology and strict testing methods developed from, with high strength, good insulation performance, high temperature resistance, water, acid, alkali, oil and chemical corrosion and other characteristics. Suitable for mining, petrochemical, smelting, high temperature and other industries. So ABS and glass steel two kinds of material helmet which good? Although ABS safety helmet has strong impact resistance and puncture resistance ability, but its compressive strength and rigidity is relatively poor, easy to be smashed flat deformation; Relatively speaking, FRP material is more pressure resistant, aging resistance is better than ABS safety helmet, the disadvantage is that the weight is relatively large.

At present, safety shoes in China can be roughly divided into: toe protection safety shoes (i.e. anti-hit labor shoes), piercing-proof safety shoes, electrical insulation shoes, anti-static safety shoes, acid and alkali resistant safety shoes. China's safety shoe standards began to be formulated in the 1990s. In 2007, the old production and inspection standards were modified and the new standards were formulated to protect the occupational health and safety of workers. Let's have a brief look at it. Electrical insulation shoes standard: GB12011-2009 Mainly used for electrician, electronic operator, cable installer, transformer installer, etc. This kind of shoes can only be worn in the working environment under the power frequency voltage of 1KV, and the upper must be kept dry, can not contact sharp objects, high temperature and any corrosive substances, if the upper bottom corrosion or damage is not able to use, to replace the new electrical insulation shoes immediately. Protection of toe safety shoes standard: GB21148-2007/GB21147-2007/GB21146-2007 The safety performance of inner baotou is divided into three levels: safety type, protection type and occupation type. The most commonly used in enterprises are safety type and protection type, so it is often used in metallurgy, mining, forestry, port, loading and unloading, quarrying, machinery, construction, petroleum and chemical industry. Anti-static safety shoes standard: GB21148-2007 Anti-static shoes in some chemical plants, gas stations, liquefied gas filling and other industries wear more, because these industries belong to flammable places. Wear antistatic shoes can eliminate the accumulation of static electricity of the human body, insulation resistance is maintained between 100K ω -1000M ω, but when wearing these shoes can not wear insulation wool thick socks or use insulation insoles, should be matched with antistatic clothes; The resistance value of shoes should also be tested within 200 hours of wearing. Only the resistance can be used as anti-static shoes within the specified range, otherwise, it can not be used as insulation shoes. Acid and alkali resistant safety shoes implementation standard: GB12018-1989 The shoes are used in electroplating, pickling, electrolysis, liquid distribution, chemical manipulation and other fields, but the acid and alkali concentration in these fields should not be too high; The shoes can not be exposed to high temperature, can not be hurt by sharp tools, the sole can not leak, wear immediately after washing with water dry, can not be in the sun direct irradiation or drying. Conductive shoes implementation standard: GB21148-2007 The shoes have good electrical conductivity, can eliminate the accumulation of static electricity in a short time, the insulation resistance is less than 100 K ω, generally used in highly antistatic or particularly flammable and explosive places, but these places require no danger of electric shock. Conductive shoes and anti-static safety shoes can not wear insulation wool thick socks or use insulation insoles, to use with conductive clothing, but also within 200 hours to carry out resistance test, only the test can be used.

Seat belts and safety ropes are not the same kind of protective equipment, but two kinds of equipment that complement each other and work together. Whether the safety belt and safety rope can be used safely is related to whether the safety of life can be guaranteed. The following small series to teach you the correct way to use. Check seat belt before use: 1) The safety belt is not broken or damaged. 2) The "D" ring is not deformed. 3) The buckle works normally. 4) Strong stitching. 5) Metal parts in good condition. Proper use of safety rope: 1) Do not tie a knot on the buffer rope; 2) The protective rope should not touch the edge of the outer leakage, otherwise the buffer rope may be damaged when falling; 3) Do not connect two buffer tethers together; 4) The maximum length from the fixed point to the safety belt connection point shall not exceed two meters; 5) Do not use the buffer rope as a maintenance rope or transportation rope; 6) Two safety ropes must be used at the same time when working high, and single hanging is strictly prohibited.